General inspection

WHAT YOU NEED 

Standard Personal Protective Equipment

• Inspect the saw chamber:

  • Look for loose or damaged sensors or cables.
  • Look for hydraulic oil around the B-axis, which may indicate a leak.

• Inspect both feeders:

  • Look for loose, misaligned or damaged photoelectric sensors.
  • Look for damage on the drive or nylon rollers.

• Inspect the Automatic Infeed Table (AIT):

  • Look for damage to the re-ref sensors.
  • Make sure the table sits above the side transfer chains (when in the up position).

• Inspect the follower:

  • Look for damage along the edge of the timing belt.
  • Look for damage to the sensor array.

• Inspect the side transfer chains:

  • Look for damaged or misaligned chains.
  • Inspect the two gap detection sensors for damage.
  • Make sure the shaft is not damaged.

• Inspect the printer:

  • Lift the printer cover and look for loose ribbon cables on the top and side print heads.
  • Make sure the printer encoder is secure and not damaged.
• Inspect the Outfeed Kickoff Table (OFK).